+238 votes
in Electric Appliances by (3.7k points)
edited by

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
+125 votes
by (3.2k points)

When a washing machine stops mid-cycle, there can be various causes for the issue. Some common reasons and possible solutions are as follows:

  1. Power supply interruption: Check if the washing machine is still receiving power. Ensure that the power cord is properly plugged into a functional outlet. If there's a power outage or a circuit breaker trip, reset the breaker or wait for power to be restored.

  2. Overloading: Overloading the washing machine with too many clothes can cause it to stop mid-cycle as a safety measure. Remove some clothes to reduce the load and try running the cycle again.

  3. Door or lid switch malfunction: Many washing machines have safety switches that prevent the machine from running if the door or lid is not properly closed. If the switch is faulty or misaligned, the machine might stop mid-cycle. Check the door/lid switch and ensure it's functioning correctly. Replace it if necessary.

  4. Clogged or faulty water inlet valve: A clogged or malfunctioning water inlet valve can prevent water from entering the washing machine, causing it to stop. Clean the inlet valve or replace it if it's damaged.

  5. Drainage issues: If the washing machine is unable to drain water properly, it might stop mid-cycle. Check for clogged drain hoses or a blocked pump filter. Clean the hoses and filter as needed.

  6. Timer or control board malfunction: If the timer or control board of the washing machine is defective, it may cause the machine to stop unexpectedly. In such cases, you might need to replace the faulty component.

  7. Motor or belt problems: Issues with the motor or drive belt can cause the machine to stop during the cycle. Inspect the motor and belt for signs of wear or damage. Replace any faulty components.

  8. Malfunctioning sensors: Some modern washing machines have sensors that detect various conditions, such as water levels or load imbalance. If these sensors are malfunctioning, they may interrupt the cycle. Professional repair or replacement may be required for such issues.

If you're not confident in diagnosing or fixing the problem yourself, it's best to seek help from a qualified appliance technician. They have the expertise to identify the exact cause of the issue and perform the necessary repairs safely. Additionally, always remember to unplug the washing machine from the power source before attempting any repairs.

Welcome to Kitchen answers hub. You can ask anything about kitchen appliances and relevant topics here
...