If your Voltas Inverter AC automatically starts even after you switched it off using the remote, there could be a few possible reasons for this behavior:
Power Interruption: Sometimes, power interruptions or voltage fluctuations can cause the air conditioner to reset. When the power comes back or stabilizes, the AC might start automatically if the last state it was in before the power interruption was the "ON" state.
Faulty Remote Control: There could be an issue with the remote control itself. It's possible that a button on the remote is stuck or malfunctioning, causing unintended signals to be sent to the AC.
Signal Interference: External interference, such as signals from other remote controls or electronic devices operating on similar frequencies, could accidentally trigger the AC to start.
Timer Function: Some air conditioners have timer functions that allow you to set a specific time for the AC to turn on or off automatically. If the timer is set, the AC will start at the scheduled time even if it was manually turned off before.
Faulty AC Unit: There might be a problem with the internal control board or circuitry of the AC unit, causing it to turn on spontaneously.
To troubleshoot and resolve this issue, you can try the following steps:
Check the remote control: Ensure there are no stuck buttons and replace the batteries with fresh ones if needed.
Power cycling: Turn off the AC and unplug it from the power source for a few minutes. Then, plug it back in and turn it on again to see if the issue persists.
Check the timer settings: If your AC has a timer feature, make sure it is not activated or set to turn on at an unintended time.
Observe for signal interference: Pay attention to whether other electronic devices or remote controls are causing interference with the AC.
If none of these steps resolve the problem, it's best to contact Voltas customer support or a professional AC technician to inspect and diagnose the issue with your specific AC unit. They will be able to provide further guidance and assistance in resolving the automatic start problem.