Question

How do you attach caned webbing to cabinet doors (glue, cabinetry, woodworking)?

Answer 1

Attaching caned webbing to cabinet doors typically involves using a combination of glue, cabinetry techniques, and woodworking skills. Here's a general step-by-step process you can follow:

1. Prepare the cabinet doors: Remove any existing panels or inserts from the cabinet doors. Clean the surfaces thoroughly and ensure they are smooth and free from any debris.

2. Measure and cut the caned webbing: Measure the dimensions of the cabinet door openings and add a few inches on each side to allow for trimming later. Use a utility knife or sharp scissors to cut the caned webbing to the appropriate size.

3. Apply glue to the cabinet door frame: Apply a thin, even layer of wood glue to the inner edges of the cabinet door frame where the caned webbing will be attached. Ensure that you cover the entire area where the webbing will be placed.

4. Position the caned webbing: Carefully position the cut caned webbing over the glued area on the cabinet door frame. Gently press it down, ensuring that it adheres to the glue and lies flat.

5. Secure the caned webbing: Use small staples or upholstery tacks to secure the caned webbing to the inner edges of the cabinet door frame. Place the staples or tacks about 1 inch apart, ensuring that they go through the webbing and into the wood of the frame.

6. Trim the excess webbing: Once the caned webbing is securely attached, use a sharp utility knife or scissors to trim off the excess webbing around the edges of the cabinet door frame. Take care to cut along the outer edge of the frame to achieve a neat and tidy finish.

7. Allow the glue to dry: Follow the drying time recommended by the wood glue manufacturer. It typically takes a few hours for the glue to fully set and bond the caned webbing to the cabinet door.

It's worth noting that the specific process may vary depending on the type of caned webbing and the design of your cabinet doors. If you're unsure or working with intricate cabinetry, it's recommended to consult woodworking professionals or follow manufacturer instructions for the caned webbing you're using.