Removing a tin can lid stuck between a small gap in a kitchen cabinet can be a tricky task, but here are some suggestions to help you out:
Safety first: Before attempting any removal, make sure to wear gloves to protect your hands from any sharp edges on the tin can lid.
Assess the situation: Take a good look at the stuck lid and determine how much space you have to work with. If it's just a small gap, you might need to use some specific tools or techniques.
Magnet: If the tin can lid is made of magnetic material (e.g., steel), you can use a strong magnet to try and pull it out. If you don't have a strong magnet, you can try using a refrigerator magnet or even a magnetic screwdriver.
Long, thin object: Find a long, thin object like a thin ruler, a coat hanger, or a sturdy piece of wire. Gently insert it into the gap and try to push the tin can lid out from the other side. Be careful not to damage the cabinet or scratch the lid.
Adhesive putty or duct tape: You can use adhesive putty or duct tape to create a sticky surface on the end of a thin stick or ruler. Insert the sticky end into the gap, and with luck, it might adhere to the tin can lid. Slowly pull it out.
Flathead screwdriver and hammer: If the lid is wedged in tightly, you can use a flathead screwdriver and a hammer. Insert the screwdriver into the gap near the lid and gently tap it with the hammer to create some space. Be cautious and avoid using excessive force to prevent damage.
WD-40 or lubricant: If the lid is stuck due to rust or other sticky substances, you can try spraying a small amount of WD-40 or a similar lubricant around the edges. Give it some time to work its way in, and then try to remove the lid using one of the methods mentioned above.
Last resort - Call for professional help: If none of the above methods work, and you are concerned about causing damage to the cabinet or injuring yourself, it might be best to seek the help of a professional handyman or a cabinet specialist.
Remember, patience is key when attempting to remove a stuck object. Take your time, and if you're unsure about anything, don't hesitate to seek assistance from someone with more experience.