When flanking a "30-inch" range with two lower cabinets, the standard distance between the cabinets is usually determined by the overall width of the range, including its side panels and any clearance requirements.
A typical 30-inch range has a width of approximately 30 inches (76.2 cm). However, you should measure the actual width of your specific range, including any side panels or protrusions.
To determine the distance between the two lower cabinets, follow these steps:
Measure the width of the range, including any side panels or protrusions. Let's call this measurement "A."
Decide on the amount of space you want to leave on each side of the range. This space is typically known as the "clearance" and is usually around 3 inches (7.62 cm) to 6 inches (15.24 cm) on each side. Let's call this measurement "B."
Calculate the distance between the two lower cabinets using the following formula:
Distance between cabinets = A + (2 * B)
For example, if your 30-inch range (A) has side panels that add up to 1 inch on each side and you want to leave 4 inches of clearance (B) on each side, the distance between the two lower cabinets would be:
Distance between cabinets = 30 inches + (2 * 4 inches) = 38 inches
In this scenario, the distance between the two lower cabinets would be 38 inches. However, keep in mind that your specific range and clearance preferences may differ, so always measure your range and adjust the clearance according to your kitchen's layout and your personal preferences.