0 votes
in Kitchen Cabinets by (3.0k points)
edited by

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
0 votes
by (3.8k points)

Hanging drywall cabinets without studs can be a bit more challenging than when studs are available to provide additional support. However, there are alternative methods you can use to securely mount the cabinets. Here's a step-by-step guide on how to do it:

  1. Use Toggle Bolts or Wall Anchors: Toggle bolts or wall anchors are effective for mounting cabinets on drywall without studs. These devices provide additional support by distributing the weight of the cabinet over a larger area.

  2. Find the Right Location: Determine the precise location where you want to hang the cabinet. Use a stud finder to locate the nearest studs, as they can serve as reference points for positioning the toggle bolts or wall anchors.

  3. Mark the Mounting Points: Use a pencil to mark the mounting points for the cabinet on the drywall. Make sure these marks are level and evenly spaced.

  4. Pre-Drill Holes: For toggle bolts, drill holes slightly smaller in diameter than the bolt's wings. If you're using wall anchors, select an appropriate drill bit size according to the anchor's instructions.

  5. Insert Toggle Bolts or Wall Anchors: Insert the toggle bolts or wall anchors into the pre-drilled holes in the drywall. For toggle bolts, you may need to collapse the wings and push them through the hole before tightening them against the back of the drywall. Wall anchors usually expand behind the drywall as you insert screws into them.

  6. Mount the Cabinet: With the toggle bolts or wall anchors in place, position the cabinet over the mounting points. Make sure it aligns properly with the marks you made on the wall.

  7. Secure the Cabinet: Use screws or bolts of appropriate length to secure the cabinet to the toggle bolts or wall anchors. The screws should be long enough to go through the cabinet's back and into the toggle bolts or wall anchors but not so long that they go through the drywall on the other side.

  8. Check Stability: Once the cabinet is securely attached, check its stability by gently applying pressure in different directions. Ensure it feels firm and stable on the wall.

Always consider the weight of the cabinet and its contents when choosing the appropriate toggle bolts or wall anchors. If the cabinet is particularly heavy or valuable, it may be best to consult with a professional or find alternative solutions like installing a wooden backing board between the wall studs to provide a more secure mounting surface.

Welcome to Kitchen answers hub. You can ask anything about kitchen appliances and relevant topics here
...