If your washing machine continues to drip water after you have turned off the hot and cold water valves on the wall, there could be a few possible reasons for this:
Water Pressure: Sometimes, residual water pressure in the pipes can cause the washing machine to continue dripping water even after the valves are closed. The pressure needs time to equalize, and the remaining water in the hoses may slowly drain out.
Faulty Valves: The shut-off valves on the wall might not be closing completely. This could be due to wear and tear, debris, or sediment buildup inside the valves, preventing them from sealing tightly.
Faulty Inlet Hoses: The inlet hoses connected to the washing machine might have a defect or damage, causing them to leak water even when the wall valves are closed.
Defective Water Inlet Valve: The washing machine's water inlet valve could be malfunctioning, leading to a slow leak of water even when it's not supposed to be active.
Water Inlet Valve Stuck Open: In some cases, the water inlet valve inside the washing machine might get stuck in the open position, allowing water to continue flowing.
Incorrect Installation: Improper installation of the washing machine or the hoses might be causing the dripping issue.
Here's what you can do to troubleshoot and resolve the problem:
Double-check the Valves: Make sure you've turned off the hot and cold water valves on the wall completely. Sometimes, valves might appear to be closed but aren't fully shut off.
Inspect the Hoses: Examine the inlet hoses connected to the washing machine for any visible leaks or damage. Tighten the connections if necessary or replace the hoses if they are worn out.
Clean the Valves: If the wall valves are not closing properly, turn off the water supply to your home and try cleaning the valves to remove any debris or sediment that might be obstructing the proper closure.
Check the Water Inlet Valve: If you suspect the water inlet valve in the washing machine is faulty or stuck open, it may need to be replaced or serviced by a professional technician.
Seek Professional Help: If you've tried the above steps and the issue persists, it's best to contact a qualified appliance repair technician to diagnose and fix the problem safely.
Remember, when dealing with water-related issues, it's essential to ensure safety by turning off the water supply to the washing machine and unplugging it from the power source before attempting any troubleshooting or repairs.